3D Vision fix for Disgaea 2 PC. This fix was made using Helifax's OpenGL wrapper and this game has a 60fps cap, meaning that the amount of fps per eye that you will get is 30 (each original frame goes only to one eye).
Fixed
- Stereoized graphics with the necessary custom formula.
- Backgrounds put at almost full depth (with low convergence scaling).
Installation
- First run the game at least once to configure it in fullscreen mode and all the other options you want.
- Download this file and extract its contents in the "Disgaea 2 PC" folder, where "disgaea2.exe" is.
- Modify the "disgaea2.exe" properties to always run as administrator. This is needed to make the default convergence value work.
- Check "3DVisionWrapper.ini". It's configured for 3D Vision monitors by default, but you can change "AlternativeView_Mode" to other values to use SBS or TAB formats.
- Run the game.
Extra note: to hide the top right information window you will probably need to hold the "Pause" key for a few seconds.
Hotkeys (numbers aren't from the numpad)
- u: toggle that gives more depth to the usual hub and battle maps. High setting. It may make some special attacks have too much separation. I recommend playing with this or the medium setting. This makes you need more convergence.
- o: toggle that gives more depth to the usual hub and battle maps. Medium setting, not so extreme as the previous hotkey. It may make some special attacks have too much separation. I recommend playing with this or the high setting. This makes you need more convergence.
- p: toggle for normal depth formula. Not much needed since the previous ones are toggles, but it can help you confirm in what setting you are.
- l: high convergence toggle (the value is 2). The default value is 1. Keep in mind that using this toggle will block the normal convergence increase/decrease keys.
Hotkeys (numbers aren't from the numpad)
- u: toggle that gives more depth to the usual hub and battle maps. High setting. It may make some special attacks have too much separation. I recommend playing with this or the medium setting. This makes you need more convergence.
- o: toggle that gives more depth to the usual hub and battle maps. Medium setting, not so extreme as the previous hotkey. It may make some special attacks have too much separation. I recommend playing with this or the high setting. This makes you need more convergence.
- p: toggle for normal depth formula. Not much needed since the previous ones are toggles, but it can help you confirm in what setting you are.
- l: high convergence toggle (the value is 2). The default value is 1. Keep in mind that using this toggle will block the normal convergence increase/decrease keys.
If you liked the fix and want to contribute for more future fixes, you can donate to this PayPal account: masterotakusuko@gmail.com