Fixed:
Fix HUD depth and put labels in 3D.
By default HUD is not collimated at infinite, this make impossible to use it to aim.
Unfortunately, increasing HUD depth make also MFD/Shkval depth change, so they are hard to use. You will have to switch mode regarding what you are using.
Installation
Download the fix here
Install the fix :
Additional Notes:Install the fix :
Use JSGME (best choice).
Unzip the fix in your JSGME mod dir. and install it with JSGME.
or
Unzip the fix and copy the contain of "x_stereoscopic_HUD_and_labels_helix" in "DCS World" install dir.
Unzip the fix in your JSGME mod dir. and install it with JSGME.
or
Unzip the fix and copy the contain of "x_stereoscopic_HUD_and_labels_helix" in "DCS World" install dir.
left Arrow Key :Toggle high HUD/shkval/MFD depth
down Arrow Key : set high HUD/shkval/MFD depth until depressed
right Arrow Key :Toggle labels in 3D
up Arrow Key : special convergence/depth settings for ext. view
F1 key : convergence/depth settings for cockpit view
Mouse 4: low separation/convergence settings
I made non-Helix mods to fix HUD/sight for the P51, A10C, Ka 50, UH-1H, Fw 190. See DCS forums. So you will only need to use it for FC3 planes, Mig 21, and other planes without 3Dvision DCS mod.