The Beast Inside - 3D-Vision-Fix - DHR-Masterotaku-Losti - V1.00
***This fix was made by Losti from DHR UE4-Universal Fix with water reflections by MASTEROTAKU ***
---------LATEST official 3D-Vision-Geforce Driver: 425.31----------
You can install 3D-Vision for the lates driver using this Method discriped here: https://www.mtbs3d.com/phpbb/viewtopic.php?f=105&t=23277
Optional donation:
If you like the fix and want to contribute for more future fixes, you can donate here: http://paypal.me/Losti3D
Special Thx goes to:
DHR - for UE4-UNIVERSAL-FIX - donate www.paypal.me/dhrdonation
DHR - for UE4-UNIVERSAL-FIX - donate www.paypal.me/dhrdonation
DarkStarSword - for everything you did for this small but nice 3D-Community and of cause your personal support!!! - donate (https://www.paypal.me/DarkStarSword) or support @
masterotaku - for guiding me with his knowledge and be present all the time for my questions!!!! THY MATE!!!!, also for Water Reflection Fix donate @ masterotakusuko@gmail.com
_________________________________________________
--- ~21 hr time of development later ---
_________________________________________________
Latest Update: V1.00 - 20.10.2019
- release
1. Fixed
- everything by DHR UE4-Universal-fix except some Lights/Shadows/Reflections:
- accurate water screen space reflections (Masterotaku), RegEx (Losti)
- additional Lights/Shadows and reflection fix (Losti)
- Volumetric Lights (Losti)- Auto Convergence HUD interactions (Losti)
- Auto Depth Crosshair (Losti)- AA and motion blure fix by ini file (Losti)
- SLI and game profile (Losti)
- SLI and game profile (Losti)
2. Issues left
- some reflections are not OK @ any POV
- flickering reflections, this is a problem from UE4 engine, also present in 2D
- Volumetric Lights are a bit more foggy than original, if you dont like it and can live with some one eye things here, you can use the "+" key to switch correction
- water reflections flickering, this is also in 2D, if you dont like it, you can go with some alternative flat reflection fix, open d3dx.ini, uncomment include = ShaderFixes\Alternative2.ini (;include = ShaderFixes\Alternative2.ini), comment out ;include = ShaderFixes\Alternative22.ini (include = ShaderFixes\Alternative22.ini)
You have other issues and/or can present a savegame with a static scene having an issue???? --- please privide a screenshot and a savegame to rauti@inetmx.de
3. Download
4. Introduction to get it working
- the game is fucking demainding !!! You need a high-end setup for this game or reduce graphic settings. This is arround 20 FPS for me @ SLI GTX 1070 @ max settings.
- ensure the shader cache = enabled in nvidia crontrol panel in the 3D settings!!!
- be sure to remove old versions using uninstall.bat
- copy archive files to ...GAMEDIRECTORY\TheBeastInside\Binaries\Win64\
- copy "Scalability.ini" from the archive to C:\Users\YOURUSERNAME\AppData\Local\TheBeastInside\Saved\Config\WindowsNoEditor
- press ALT+ENTER 2 times if you are in main menu and do not have 3D kicked in!
- AA is the game settings is the same for ULTRA and HIGH settings, less AA at medium and NO AA at low.
- copy archive files to ...GAMEDIRECTORY\TheBeastInside\Binaries\Win64\
- copy "Scalability.ini" from the archive to C:\Users\YOURUSERNAME\AppData\Local\TheBeastInside\Saved\Config\WindowsNoEditor
- press ALT+ENTER 2 times if you are in main menu and do not have 3D kicked in!
- AA is the game settings is the same for ULTRA and HIGH settings, less AA at medium and NO AA at low.
4.1 Ingame Settings
- up to you (i think), the fix was made with MAXED out settings,if there are any issues, please provide your settings, try maxed out settings !
5. Key Settings
5.1 Key Settings (Keyboard + Mouse Gameplay)
"NUM /"
- cylce HUD-Depth
"NUM *"
5.2 Key Settings (Controller Gameplay)
"NUM *"
- switch between high and low convergence, in general its up to you to choose convergence, use it for cutscenes for example
"NUM +"
- switch to more ambient volumetric lights but have some one eye issues, its up to you use this alternative mode
- switch to more ambient volumetric lights but have some one eye issues, its up to you use this alternative mode
"XB_GUIDE"
- switch between high and low convergence, in general its up to you to choose convergence, use it for cutscenes for example
6. Key Setting - Customization
----only for more advanced users---
If you don’t like the settings the fix comes with, you have to find your own likes:
- to watch your current convergence/separation set hunting=1 in d3d11.ini
- change constants/settings/keys and check the result in game by pressing F10
6.1 3Dmigoto - Constants
----only for more advanced users---
- the fix comes with the following default constant settings:
;HudDepth
x20=0.1
;CrosshairDepth
x21=1.0
;AutoDepthToggle
x22=1.0
;MenuIndicator
x23=0.0
;AimIndicator
x24=0.0
;InventoryMenuIndicator
x25=0.0
;Viewobject
x30=0.0
;vollightswitch
x26=1.0
;water reflection switch
x27=0.0
6.2 Advanced Key Config
----only for more advanced users---
You can define keys in [Constants] section with:
[KeyWHATEVERYOURNAMEIS]
Key = KEY
CONSTANTX = XXX
SEPARATION = SEPXX
CONVERGENCE = CONVXX
- for choosing a key look here for replace KEY with it (http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx)
- replace CONSTANTX with the constants written above
- replace XXX with a value, see above
- replace SEPXX with a separation value, leave it = the separation you choose by STRG+F3/4, no changes, 100 = 100%
- replace CONVXX with a convergence value, leave it = the convergence you choose by STRG+F5/6, no changes
Key Press Types:
- type = hold ==> only active while holding this key
- type = toggle ==> enable/disable this setting
- type = cycle ==> cycles the settings via this key, e.g. SEPARATION = 100, 50 will cycle between 100% and 50% separation pressing this key
--if you have more settings you need to define it for every cycle step:
--means: if you want to change separation and you want to use the same constant for both settings use:
SEPARATION = X1, X2
CONSTANTX = XXX, XXX
- no definition = settings set on ON once pressed the key
You can also change any existing key definitions changing the key behind key = in the d3dx.ini .... if you like the setting but want another key for it.
Acknowledgements
- THANK you DSS for being on this earth :-)
- THANK you masterotaku for being on this earth :-)
- Big thanks to Bo3b, DarkStarSword, Flugan and all others involved in creating 3DMigoto; an amazing wrapper that allows us to fix our favorite DX11 games in 3D Vision!
- NVIDIA for creating 3D-Vision as a tech!
Acknowledgements
- THANK you DSS for being on this earth :-)
- THANK you masterotaku for being on this earth :-)
- Big thanks to Bo3b, DarkStarSword, Flugan and all others involved in creating 3DMigoto; an amazing wrapper that allows us to fix our favorite DX11 games in 3D Vision!
- NVIDIA for creating 3D-Vision as a tech!